NIM-ECL Converter
NIM-ECL Converter
Fast NIM logic to Emitter Coupled Logic
Signal Conversion Module

4 independent channels
Convenience in a small package
(5.7 x 3.5 x 3.0 cm)

Convenient, Compact Solution
The NIM-ECL Converter was originally created to solve signal level conversion dilemmas for small data acquisition systems and is now commercially available in a small, high quality unit. The NIM-ECL Converter is a cost-effective solution where only a small number of signals require level translation.
Power Requirements
The NIM-ECL Converter operates from -6V power (supplied at the front panels of many CAMAC and some NIM bins) at <100 mA. Each unit is provided with a 5.1 x 2.1 mm DC power jack (center negative) for use with a 6V DC wall transformer, or optionally, 60cm pigtail leads terminated in phone tip contacts or a 9-pin preamp power connecter is optional. The power input is polarity protected.
Logic Level Conversion
The NIM-ECL Converter provides 4 channels of conversion from fast NIM level signals to ECL level logic signals.
The NIM-ECL Converter is provided with a self-adhesive Velcro fastener to facilitate convenient mounting.
Electrical Specifications
LEMO receptacles accept NIM-level input signals (50 ohm termination). Minimum pulse width is 3.0 ns. The propagation delay is less than 2.5 ns. The ECL-level output signal is provided on a recessed header connecter.
The NIM-ECL Converter carries a two-year limited warranty.

Copyright 1998-2001, Radiation Technologies, Inc., All Rights Reserved

[home] [products] [background] [customers] [systems] [contact us]